Figure Sculpture (SC260-5, SC360-5, SC460-5)

• 16 x 20 x 3/4 inch plywood.
• Two 20 inch runners - 1 x 2 inch strips.
• 1/2 inch flange.
• 1/2 x 18 inch pipe.
• 1/2 inch elbow.
• Two 1/4 inch to 1/2 inch reducers.
• 1/4 x 6 inch pipe.
• 1/2 inch tee.
• 1/4 inch aluminum wire (approx. 10 feet.)
• 1/16 inch aluminum wire.
• 40 lbs. water based clay.
• 3 foot measuring tape.
• 12 inch and 11 inch clay tool.

• 16 x 16 x ¾ inch plywood board.
• Two 16 inch runners (1 x 2 inch strips.)
• ½ inch flange.
• ½ x 6 inches pipe. 
• ¼ inch aluminum wire (one roll.)
• 1/16 inch aluminum wire (one roll.)
• Plastilene
• terracotta -later in semester
• wax -later in semester
• plaster -later in semester